|
| |
Power Timer Kit Includes MK13EU
Power Timer MT10
Lamp Module LM12
Appliance Module AM12

Description
The Power Timer passes on commands over your existing AC house wires to the Lamp
and Appliance Module.
The Lamp Module lets you switch and dim any incandescent lamp up to 300W.
The Appliance Module lets you switch any appliance up to 10 Amps.
The Power Timer Kit has an On/Off, Dim/Bright, All Lights On/All Units Off
control. It also has a handy Sleep feature. Turn on a device from the
keypad and then press the Sleep button — 15 minutes later the timer will
automatically turn the device off. Press the Sleep button twice and the
timer will turn the device off in 30 minutes, and so on. Turn a device off
then press the Sleep button and the device will turn back on again in 15
minutes. A backup battery (9 volt) saves programming and time in the event
of a power failure.
Examples
It’s 11:00 pm. You’re reading in bed. You’ve used the Power Timer next
to your bed to dim the lights by 30%. Now, it’s time to sleep. You turn
the light right off but the room’s not dark. Not completely. There’s light
coming from down the hall. But there’s no need to get up. You simply reach out
for the Power Timer again and switch off the offending light. In the early hours
of the morning, you hear a strange noise. Again you use the Timer, this time to
turn on all the lights in your house with one press of a key. You wait a minute
and hear nothing. All is well. And you haven’t got out of bed once. That’s
convenience. That’s Smart Lifestyle technology.
Add-Ons
- X10 light switches and dimmers (up to 8 groups can be controlled by the
timer)
- Computer Interface that can be triggered from the Power Timer
|