QUICK FIND MARKINGS TABLE   It should be pointed out that if you have a stripper clip that dosen't have a marking visable on the back of the clip, then quite often the marking is hidden under the spring.

Click on the Photo to take you to relevant page
A (2.38 mm high)	B.P.	H Sideways	MFT	TF&S
A (3.57 mm high)	CI DAQ	H Sideways	MTY	T.F & S LTD	Wire Skeletal frame
A (3.57 mm high), Hole in spring	C1- IVI -	IQV I8A (Indian part number)	MTY          60	7,92/7,62,Y,n	No marking Phosphated finish, Two stops per side
A Sideways (3.57 mm high)	ClemSul	I V I	NE	10 (10-inside-double-circle)	No marking Stainless Steel, Two stops per side
A (5.55 mm high)	D.S.	KOI (inside-a-diamond)	N.S.H	Translusent Plastic	No marking Phosphated finish
A O	E L (inside a segmented circle)	LUFKIN	P.C.I	Black Plastic	No marking Phosphated finish Cut-out either side of spring
AR	E/L (inside a segmented circle)	MB	QV66. (British drawing number)	White Plastic	No marking Phosphated finish End profile 1
A1	F.T.P.	MBO	RACMANN	White Plastic	No marking Phosphated finish End profile 4
A3	G.G.G.	MB Z	RG		No marking Phosphated finish End profile 4
BGR	G.G.M.	MB 3 (inside-a-rectangle)	SEY		No marking Gloss black finish
B P D	H Sideways	MB4 (inside-a-rectangle)	SMI		No marking Gloss black finish, Blued spring
B.P	H Sideways	MB 4	T (inside an oval)		No marking Gloss black finish
Click on the Photo to take you to relevant page

If you have any comments or can provide information about unlisted markings please email me by clicking Here To view the different markings, click on the images to take you to that index page. Stripper Clips Ammunition Cans Bandoliers Magazine Charging Adaptors Link and Belts Other Information Home Top of Page