AMERICAN MAGAZINE CHARGING
ADAPTORS
M14 MAGAZINE
FILLER
|
Based on the M1 Carbine
magazine filler, these very simple and cheap adaptors slide onto
only the rear section of the magazine unlike the FAL type adaptors
which cover the entire top of the magazine. This same design
continues to be used with the M16 magazine and stripper clips.
From Douglas
K Wozny :-
What you call the magazine adapter is actual called
Filler, Magazine. It is covered by military specification MIL-F-46677
and drawing 7791154 (the part number that it is stamped on the
filler). National Stock Number (NSN) is 1005-00-052-4336.
|
Finish: Phosphated finish.
Markings:
 |
 |
 |
 |
COM
7791154 |
G.G. GREENE
779ll54 |
J.P.MFG.
779ll54 |
R.F.M
7791154 |
 |
 |
 |
 |
R.F.M
779ll54 |
SEY
779ll54 |
779ll54
SEY |
No Marking |
|
MARKING |
MANUFACTURER |
| COM |
Comerford
Manufacturing Co., Anaheim, CA. |
| G.G. GREENE |
G
G Green Enterprises Inc., West Warren, PA. |
| J.P.MFG. |
JP
Mfg Co., St Louis, MO. |
| R.F.M |
Ford
Radio & Mica, Brooklyn, NY. |
| SEY |
Seymour
Products Co., Seymour, CT. |
| No Marking |
Unknown. |
Info courtesy of Jonathan Bryant
Info
courtesy of Lee Emerson
Info courtesy of Doug K Wozny
Pics
courtesy of Phillip Owen
Pics courtesy of Bob Reynolds
New filler examples (except 'no marking') from Gary's Guns.
|
 |
 |
Left
to right
1st Type, 2nd Type, 3rd Type |
Left
to right
1st Type, 2nd Type, 3rd Type |
1st Type Filler
(1st
model, similar design to the M1 Carbine filler)
Available through the eBay vendor Kayhulm |
2nd Type Filler
(standard
filler encounted) |
3rd Type Filler
(heavier
gauge steel) |
 |
 |
 |
|
SEY |
COM
7791154 |
No Marking |
 |
 |
|
SEY
( slanted up ) |
G.G. GREENE
779ll54 |
|
 |
 |
|
|
SEY
( slanted down ) |
J.P.MFG.
779ll54 |
|
|
 |
|
|
R.F.M
7791154
(left facing) |
|
|
|
|
Pic
courtesy of Phillip Owen |
|
|
|
|
R.F.M
7791154
(right facing) |
|
|
|
|
 |
|
|
|
|
R.F.M
779ll54
(right facing) |
|
|
|
|
 |
|
|
|
|
SEY
779ll54 |
|
|
|
|
 |
|
|
|
779ll54
SEY |
|
|
"THERMOLD"
MAGAZINE CHARGING ADAPTOR
Information and pics
courtesy of Gary Sowers.
This plastic MCA was made
by Thermold in the USA. It is designed to fit the 'Inch' type
magazine lug and I would guess it was made under contract for
Canada.
Markings:
Left Hand Side: PAT. NO.4.538.371
Right Hand Side: THERMOLD D.&D. INC. WILSON
N.C.U.S.A.
Finish:
Black plastic.
Pic
courtesy of Gary Sowers
|
