Animating The Door in GA5

OK, lets get that door animated!!

Open your UFO file in GA5

~~~~~~~~~~~~~~~~~~~~~~~~~

At this point if you have a background that you want on all layers then follow this tutorial

HERE

But only for the number of name layers that you have.

~~~~~~~~~~~~~~~~~~~~~~~~~~

Highlight the top layer, hold down Shift and click on the bottom layer.

Click on the Distribute to frames icon

and voila this is what will happen!!

Neat ah!!

Thank you Robert!!

Continue.

Select frames 2-5 in the running board, Right Click/Reverse Frame Order, then click OK.

Right-click again and click on Duplicate Frames and then (last time) Right-click/Reverse Frame Order.

Your running board should now look like the example below, with the closed doors at frames 5 and 6.

Now select frames 5 and 6 and right click and go to frame properties and put a value of 20 in there.

Now select frame 1 and put a value of 80 or 120  in the frame properties box.

This is what you will have.

This is one that I put sparkles on, it sort of gives you the feeling that the sparkles are unlocking the door, hence the name of this tutorial.

To add sparkles, Follow me by clicking on the link below

SPARKLING THE DOOR

INDEX

Please feel free to print this tutorial out for your own personal use.

I do not give permission under any circumstances for you copy this tutorial in any way to post on-line, pass through email groups,

or re-write and claim as your own.

Any resemblance to any other tutorial like this is purely coincidental and not intentional.

This tutorial was written on the 9th January 2007 and is therefore 

© Edna Munn