RPEdit - Patch
Editor for the...
2120-VGS, RP-21D,
JM-150/250, RP-20, RP-12, RP-10, and Valve-Fx
RPEdit v2.2 - release now
available for download....
Main
Features
- Support for 2120-VGS, RP-21D,
JM-150/250, RP-20, RP-12, RP-10, and Valve-Fx devices.
- Reads and write both SysEx
and SAP (text format) format files.
- Separate dialog for each
module with immediate access to all module parameters.
- Real-time parameter
control (for those devices that support it).
- Online help for module
parameters.
- File browser helps find
and manage all your patch files;
- Utility Settings
management;
- It's free.
Device Support Status
***
IMPORTANT - Read This!! ****
WARNING!!
Use
of RPEdit with unsupported versions of devices will likely
cause corruption of files edited, and/or corruption of your
device's memory (requiring a factory reset and loss of all
user information on the device). Do not use RPEdit with
earlier versions to those indicated below. In any case,
always ensure you have a good backup of any important
information before using this program. Note that some
versions are listed as "beta" versions. These
versions are in fact your best (or only) option to work with
RPEdit. Digitech/Johnson produced these versions to fix
numerous bugs that existed in earlier release versions.
Unfortunately, they never released "final" versions
with these fixes. However, many users are successfully using
these versions with RPEdit, with few, if any, problems
reported.
| Device |
Supported
Version(s) |
Comments |
| 2120-VGS |
v2.10 or greater |
Firmware EPROM upgrade
available - contact support@digitech.com |
| 2112-VGS |
None |
Firmware EPROM upgrade to
2120 v2.10 available - contact support@digitech.com |
| RP-21D |
v1.10 or greater |
Firmware flash upgrade
available - download from http://www.digitech.com/products/productpgs/rp21dupdate.htm
Also a later
beta
version, with additional fixes, is available from ftp.digitech.com/updaters/Beta |
| JM-150 |
v1.141 or greater |
Beta version available
from ftp.digitech.com/updaters/Beta. Digitech/Johnson
now appears unlikely to ever release a final version
of this flash upgrade, so you must use this version. |
| JM-250 |
v1.171 or greater |
Beta version available
from ftp.digitech.com/updaters/Beta. Digitech/Johnson
now appears unlikely to ever release a final version
of this flash upgrade, so you must use this version. |
| RP-20 |
v1.50 or greater |
Beta version available
from ftp.digitech.com/updaters/Beta. Digitech/Johnson
now appears unlikely to ever release a final version
of this flash upgrade, so you must use this version. |
| RP-12 |
v1 |
|
| RP-10 |
v2 |
Firmware EPROM upgrade
available - contact support@digitech.com.
Note that you can use RPEdit wirh earlier RP-10 v1
releases but you must be very careful not to send any
programs that use the newer algorithms 34, 35, or 36,
or to send any program number greater than 100. If
you do, you WILL crash the RP-10 and have to factory
reset it, loosing all user programs and settings. |
| Valve-Fx |
v1 |
|
Sorry,
but RPEdit does not and will not support the RP-2000, RP-14,
RP-7, GSP-2101, or any other device not listed above.
DownLoad & Installation
RPEdit installation is
very simple...
- ***IMPORTANT
*** Read the current Device Support
Status first.
- Download
the RPEdit setup program for Windows from the RPEdit page
at the Harmony Central site (approx
1.7M ).
- Run this program and
follow the Setup instructions.
- Optionally, install
the following minor update(s) by opening the zip file and
extracting to the folder where you installed RPEdit,
overwriting the existing files there...
- To see what's changed
since the previous release, refer to the Update History.
Update History
RPEdit
2.2
- Released
4 November 2002
- Fixed
order of Fast and Slow Rotor Speed parameters in Rotary
Speaker module.
- Fix
to add Off value to program transmit map MIDI values.
- Fixed
Whammy Shift (Min and Max) parameter.
RPEdit
2.1
- Released
7 December 2001.
- Minor
upgrade to change contact address and RPEdit download
site.
RPEdit
2.0
- Released
12 October 2001.
- Added
additional Comm confirmation options for more control.
- Fixed
occasional invalid Algorithm name warning in SAP parser
for RP-10, RP-12, Valve-Fx.
- Fixed
crash on opening patch with Harmony module.
RPEdit 2.0b6
(v2 Beta 6)
- Released
15 May 2001.
- Added
Utility Settings dialog.
- Added
new Startup options - "Enable Listen mode",
Enable Talk mode", "Request current program",
"Request program names", and "Request
current utility settings".
- Added
spin controls - e.g. Channel and Program parameters now
use these.
- Changed
control highlighting display and operation for module
dialogs.
- Program
names are now cached for each bank to avoid unnecessary
re-downloading.
- Fixed
configuration 10 to reflect unusual ordering of Fx
modules in sysex format.
- Fixed
Dual and Stereo Primary and Secondary Reverb Decay
parameter ranges.
- Fixed
parsing of Volume Pedal, and Primary and Secondary Reverb
Decay parameters (dependent on later module parameters).
- Fixed
SAP generate error when no description.
- JM-150
renamed to JM-150/250 (Note: This required renaming
factory and user defaults files. User defaults can be re-instated
by renaming .\RPEdit\Defaults\SD2_JM-150_User.tcl to SD2_JM-150_250_User.tcl).
- Fixed
JM links to Fx module parameters.
- Fixed
File Save As dialog which incorrectly included the .MID
format.
- Fixed
Stereo Analog Delay default names (now "FlStADly"
and "HfStADly").
- Fixed
various problems associated with resetting comm and
timeouts.
- Fixed
"Changed" indicator to detect Device and
Channel Number changes.
- Worked
around problem invoking Web browser and Text Editor under
Windows 2000.
- Miscellaneous
documentation and image updates.
RPEdit 2.0b5
(v2 Beta 5)
- Released
21 March 2001.
- SAP
now generated automatically on file or program open.
- Fixed
SAP parsing of many-word parameters in links.
- Fixed
link min and max range check.
- Fixed
incorrect Thru module hidden parameters, Level and Pan,
and updated factory defaults.
- Fixed
JM-150 Channel parameter (A-B added for certain Johnson
models).
- Implemented
disabled Mid parameter for JM-150 Matchless Amp models.
- Fixed
crash when browsing a folder with invalid files.
- Changed
"Program Save to..." to select destination
program number before sending program.
- Changed
edit box controls to update changed status on each
keypress.
- Many
new amp and guitar images added, and panel images updated.
- Added
ability to change guitar and amp image by right-clicking
on image in main dialog.
- Miscellaneous
documentation updates.
RPEdit 2.0b4
(v2 Beta 4)
- Released
22 December2000.
- Fixed
problem of sound getting killed after a configuration
change (Thru module had invalid custom default value).
- User
defaults saved in the "Save User Default"
dialog, while in Talk mode, are now automatically sent to
the device.
- Comm
timeout will abort subsequent queued comm messages.
- Added
"Comm\Use fixed SysEx channel" and "Comm\Fixed
SysEx channel" options.
- Removed
obsolete "Comm\Use SysEx acknowledgements"
option.
- Added
visual feedback when Panel knob is rotated or clicked.
- Fixed
incorrect JM-150 panel keys.
- New
JM-150 Panel image.
- New
PRS and J112 images.
- Fixed
JM Frequency parameter in PreDelay, Rotary Speaker,
Analog Delay modules.
- User
default files are now created by RPEdit (i.e. now not
installed or uninstalled).
- .rpedit
and .sap file associations are automatically setup on
installation.
RPEdit 2.0b3
(v2 Beta 3)
- Released
10 December 2000.
- Added
support for file descriptions.
- Added
panels for remote key control.
- Fixed
double-trigger of Sampler in Talk mode.
- Change
so that Custom value used for Defaults on startup.
- Fixed
Defaults for RP-10/RP-12/Valve-Fx Mixer modules.
- Corrected
RP-20 Link To parameter to have only one expression pedal
option; i.e. "Exp1".
- Corrected
RP-20 Compressor Level range.
- Corrected
several RP-20 factory defaults to match the latest
firmware.
- Fixed
dumping of user defaults
- Added
right click on Config module button for quick access to
Config parameter.
- Added
right click on module buttons for quick access to Default
parameter.
- Added
comment on 2112 upgrade to 2120.
RPEdit 2.0b2
(v2 Beta 2)
- Released
1 September 2000.
- Removed
Comp module from RP-20 Fx modules.
- Corrected
several RP-21D factory defaults to match the v1.10
firmware.
- Corrected
the inputs into the Fx chain in the wiring diagrams.
- Fixes
to make SAP parsing more robust after switching devices.
- Fixed
loss of On/Off parameter for Fx4 to Fx8 for the 2120.
- Fixed
corrupt save of sysex file when comm device does not
equal program device.
- Re-arranged
readme/help sections slightly.
RPEdit 2.0b1
(v2 Beta 1)
- Released
8 April 2000.
- Improved
link set-up - link dialogs open automatically.
- Fixed
JM and 2120 dumping of user Preamp module defaults.
- Fixed
crash when unlinking a footswitch or occasionally when
changing link parameter.
- Fixed
crash when Graph displayed and module is refreshed.
- Original
state is set when program is opened from device.
- Fixed
2120 St Gated Reverb parameters.
- Fixed
2120 Fx module On/Off states.
- Fixed
RP-21D Thru defaults.
- Added
"Show All Parameters in Distortion modules"
option.
- Added
generalized sysex capture function (replaces bulk/system
dumps).
- Improved
comm performance when sending bulk dumps.
- Added
ability to open Digitech "Updater" MIDI (.mid)
files.
- Separate
user default files now created for each device.
Back to Bruce's Home Page.