Manufactured in 1941, this camera was functionally identical to the Retinette type 160.
The main differences being that the Retina has a chrome top cover, and the Retinette has a black-painted cover,
and that where the Retinette has black leatherette under the rewind knob, the Retina has a chrome plate instead.
This camera was unusual for Retina in having a front-cell focusing lens, and there is little doubt this was a cost saving measure.
Like the Retinette type 160, the lens and shutter choices for this model were either a 5cm f/3.5 Kodak-Anastigmat in a Compur shutter,
or a 5cm f/4.5 Kodak-Anastigmat in a four-speed Gauthier shutter, as on this example.
This example has just two screws filling the holes in the top plate where an accessory shoe would fit. This was common on many Retina
I cameras of the era.
Guide to using the Retinette II (type 160)
Get your Retina repaired
Back to the Retina camera list